BARTEC BENKE CFPP-4.2, Operating Instructions Manual

Page: 44 / 107

42 Transport, Packaging and Storage
CFPP Process Analyzer CFPP-4.2 03/2016
6.1 Transport
To move the analyzer across short distances, suitable lifting machinery can be used.
Consider the substantial weight of the analyzer (see technical data in chapter 4), the
asymmetrical distribution of its weight, and its high center of gravity.
WARNING!
Danger of overbalancing!
If you get caught underneath the analyzer, this can cause serious injury or
death. FOR THIS REASON:
-
Only move the analyzer within its packaging, if possible.
-
Do not lift the analyzer higher than necessary.
-
During transport, secure the analyzer with tension belts to prevent it
from toppling over.
-
Keep the analyzer upright while moving it.
-
Keep a safe distance.
If you want to move the analyzer without its packaging, also note the following:
•
Only the lower frame is appropriate for lifting the analyzer.
•
To prevent the analyzer from slipping, use intermediate layers of wood.
For moving the analyzer with a crane, a ring screw is provided in the center of the upper
crossbeam of the carrying frame.
WARNING!
Suspended loads!
If you get caught underneath the analyzer, this can cause serious injury or
death. FOR THIS REASON:
-
Use suitable lifting equipment.
-
Keep a safe distance when lifting the analyzer, because it may
swivel out to one side.
-
Do not lift the analyzer higher than necessary.
-
Do not stand below the analyzer.
-
Keep a safe distance.