BARTEC BENKE CFPP-4.2, Operating Instructions Manual

Page: 51 / 107

Installation and Disassembly 49
03/2016 CFPP Process Analyzer CFPP-4.2
Before installing the vent and drain lines, observe the following safety warning:
WARNING!
Possible explosion or fire!
An explosion or a fire can cause serious injury or death. FOR THIS REASON:
-
Make sure that no other gases (e.g. hydrogen or oxygen used by
other analyzers) and no other vapors or liquids can reach the
analyzer through the vent-drain-system.
The vent and drain lines must be pressure-free and open to the atmosphere. Make sure
that the lines always run downwards to the drain.
Observe the regulations for mounting the pipe connections. Please refer to the supplied
manufacturer’s documentation.
•
Clean incoming pipes to remove any dirt particles and shavings.
• Observe the minimum bending radius of the pipes.
•
Make the pipe connections according to the supplied layout drawing.
• Check all connections for possible leaks.
The connections are now made. The analyzer is now ready to be connected to the power
supply.
7.1.5 Electrical Connections
The analyzer operates with electrical power.
DANGER!
Dangerous electric current!
If you touch components carrying electric current, the electrical power can
cause serious injury or death. FOR THIS REASON:
-
Switch off the power supply and secure it, so that it cannot be
switched on accidentally.
-
All work on the electrical system must be carried out by personnel
qualified for electrical installation and explosion protection.
-
Do not remove or disable any protective devices.