page 65
page 65
page 65
page 65
page 65
375 SE
800-00162
CUTAWAY VIEW OF TYPICAL SINGLE PUMP
CUTAWAY VIEW OF TYPICAL SINGLE PUMP
CUTAWAY VIEW OF TYPICAL SINGLE PUMP
CUTAWAY VIEW OF TYPICAL SINGLE PUMP
CUTAWAY VIEW OF TYPICAL SINGLE PUMP
FIGURE 1
FIGURE 1
FIGURE 1
FIGURE 1
FIGURE 1
B. VANE PRESSURE FEED
B. VANE PRESSURE FEED
B. VANE PRESSURE FEED
B. VANE PRESSURE FEED
B. VANE PRESSURE FEED
The intra-vane design provides a means of controlling the outward thrust of the vane against the ring and maintains tip
loads within reasonable limits. In the intra-vane cartridge, full system pressure is continuously applied only to the area
between the vane and insert. This area is small and thrust is correspondingly light. During vane travel through pressure
areas, full system pressure is applied against the bottom area of the outer vane. The valving of pressure to and from
the bottom area of the vane is through holes drilled in the rotor, as shown in Figure 3.
PRESSURE FEED TO VANES IN INTRA-VANE
PRESSURE FEED TO VANES IN INTRA-VANE
PRESSURE FEED TO VANES IN INTRA-VANE
PRESSURE FEED TO VANES IN INTRA-VANE
PRESSURE FEED TO VANES IN INTRA-VANE
CARTRIDGE
CARTRIDGE
CARTRIDGE
CARTRIDGE
CARTRIDGE
FIGURE 3
FIGURE 3
FIGURE 3
FIGURE 3
FIGURE 3
SINGLE PUMP MAINTENANCE CONTINUED...
