page 21
page 21
page 21
page 21
page 21
375 SE
800-00162
SPECIAL TORQUE SPECIFICATIONS
SPECIAL TORQUE SPECIFICATIONS
SPECIAL TORQUE SPECIFICATIONS
SPECIAL TORQUE SPECIFICATIONS
SPECIAL TORQUE SPECIFICATIONS
LUBRICATE WITH ANTI-SEIZE COMPOUND PART NO. 514-00700
LUBRICATE WITH ANTI-SEIZE COMPOUND PART NO. 514-00700
LUBRICATE WITH ANTI-SEIZE COMPOUND PART NO. 514-00700
LUBRICATE WITH ANTI-SEIZE COMPOUND PART NO. 514-00700
LUBRICATE WITH ANTI-SEIZE COMPOUND PART NO. 514-00700
Swing Motor Mounting Studs/Nuts ................................................................ 64 Ft. Lbs.
Swing Motor Gearbox Mounting Bolts ........................................................... 310 Ft. Lbs.
Turntable Bearing Bolts (Do not re-use old bolts/nuts.) ................................ 500 Ft. Lbs.
Other torques, for the valves, pumps, and motors are found in the service literature for those
components.
WARNING
WARNING
WARNING
WARNING
WARNING
Loose or overtorqued bolts can cause death,
Loose or overtorqued bolts can cause death,
Loose or overtorqued bolts can cause death,
Loose or overtorqued bolts can cause death,
Loose or overtorqued bolts can cause death,
severe injury, or property damage. Maintain
severe injury, or property damage. Maintain
severe injury, or property damage. Maintain
severe injury, or property damage. Maintain
severe injury, or property damage. Maintain
proper bolt torque. Visually check bolts daily.
proper bolt torque. Visually check bolts daily.
proper bolt torque. Visually check bolts daily.
proper bolt torque. Visually check bolts daily.
proper bolt torque. Visually check bolts daily.
Check torque every 50 hours.
Check torque every 50 hours.
Check torque every 50 hours.
Check torque every 50 hours.
Check torque every 50 hours.
WARNING
WARNING
WARNING
WARNING
WARNING
In critical applications (such as Turntable Bearing
In critical applications (such as Turntable Bearing
In critical applications (such as Turntable Bearing
In critical applications (such as Turntable Bearing
In critical applications (such as Turntable Bearing
Bolts and any grade 8 or grade 9 bolts), once the
Bolts and any grade 8 or grade 9 bolts), once the
Bolts and any grade 8 or grade 9 bolts), once the
Bolts and any grade 8 or grade 9 bolts), once the
Bolts and any grade 8 or grade 9 bolts), once the
old bolts and nuts have been loosened, they must
old bolts and nuts have been loosened, they must
old bolts and nuts have been loosened, they must
old bolts and nuts have been loosened, they must
old bolts and nuts have been loosened, they must
be replaced rather than re-tightened and re-
be replaced rather than re-tightened and re-
be replaced rather than re-tightened and re-
be replaced rather than re-tightened and re-
be replaced rather than re-tightened and re-
torqued. Original clamping force cannot be
torqued. Original clamping force cannot be
torqued. Original clamping force cannot be
torqued. Original clamping force cannot be
torqued. Original clamping force cannot be
achieved using the old bolts and nuts.
achieved using the old bolts and nuts.
achieved using the old bolts and nuts.
achieved using the old bolts and nuts.
achieved using the old bolts and nuts.
