page 27
page 27
page 27
page 27
page 27
375 SE
800-00162
HYDRAULIC OIL
HYDRAULIC OIL
HYDRAULIC OIL
HYDRAULIC OIL
HYDRAULIC OIL
DRAIN PLUG
DRAIN PLUG
DRAIN PLUG
DRAIN PLUG
DRAIN PLUG
HYDRAULIC OIL CHANGING PROCEDURE
HYDRAULIC OIL CHANGING PROCEDURE
HYDRAULIC OIL CHANGING PROCEDURE
HYDRAULIC OIL CHANGING PROCEDURE
HYDRAULIC OIL CHANGING PROCEDURE
This procedure should be used once during the breaking in period of a new loader (after one week, or 50 hours
of operation) and then every six months, or 1000 hours.
Throughout the oil changing procedure remember that cleanliness is absolutely necessary. Hands, tools,
funnels, oil filling equipment, the oil filler opening, and, above all, the hydraulic oil itself must be kept absolutely
clean. Dirt in the hydraulic system can cause serious damage to pumps, valves, and cylinders.
DRAINING THE RESERVOIR
DRAINING THE RESERVOIR
DRAINING THE RESERVOIR
DRAINING THE RESERVOIR
DRAINING THE RESERVOIR
1. First, be sure boom is lowered to the ground and secure.
2. Remove the reservoir drain plug to drain the oil.
HYDRAULIC RESERVOIR MAINTENANCE CONTINUED...
NOTE: Reservoir shown
may not reflect the style
used on your machine.
