Barco XHD-Series User Manual Download Page 127

Page: 127 / 159

Figure H.11. Application preferences

Application settings

The dialog box displays the following information.

Crop definition file:

the global crop definition file.

If encoding jobs are set to perform cropping and do
not have a local crop file or are set to not use the
local crop file, they will use this global crop defini-
tion file.

Supported source movie exten-
sions:

a list of file extensions that X-Agora recognizes as
movie files.

Supported source image exten-
sions:

a list of file extensions that X-Agora recognizes as
image sequences.

Frame rate for image sequences:

the frame rate to use for the output video of image
sequences.

Barco Pn: 60600320

124

Appendix H: Tools

Barco Media Server XHD-Series User Guide

Summary of Contents for XHD-Series
































































































































































Search results

Summary of Contents for XHD-Series

Reviews:

Related manuals for XHD-Series

Brands by name

Popular brands

Barco XHD-Series, User Manual

Search results

Summary of Contents for XHD-Series

Reviews:

Related manuals for XHD-Series

Brands by name

Popular brands