![background image](http://html1.mh-extra.com/html/barco/rhdm-2301/rhdm-2301_user-manual_3809077074.webp)
74 _____________________________________________________Barco - RHDM-2301 - User manual
Full functionality description
•
Boost
(see figure below-a): Anti-aliasing is set to an extreme value. This setting is
not advised to display video content.
•
Balanced
(see figure below-b): This type of anti-aliasing is applied by most display
units and results in a moderate setting.
•
Conservative
(see figure below-c): This setting is preferred for video signals and
results in a strong reduction of anti-aliasing effects while preserving good sharpness
of the image.
Figure 38: “anti-aliasing”(a-c) and “Sharpness”(d-f) settings in the OSD submenu
“Resizer settings”
Pixel shape:
•
Point
: No corrections for the pixel shape are applied.
•
Square
: A correction for the square form of the pixels of the LCD panel is taken into
account. This leads to a sharper image.
•
Diamond
: A correction for the square form of the pixels of the LCD panel is taken
into account combined with a correction for the case a surface integration has been
done at the side of the camera.
Steepness:
Sets the type of interpolation which is used for determining the values at the
pixels of the resized image.
•
Linear
(see figure below-a): The value of the intermittent pixels is determined by a
linear interpolation of the sampling points.
•
Super
(see figure below-b): The area between two sampling points is divided in 3
equidistant parts. The value at the sub-pixels situated in the middle area is deter-
mined by linear interpolation while the value of the sub-pixels situated in the outer 2
areas is equal to the value of the nearest sampling point.