Barco - RHDM-2301 - User manual ____________________________________________________ 61
Full functionality description
Press (
)
or (
)
to select the highlighted number
To change the number, move with the trackball or type a number with the
numeric keypad
Press (
)
or (
)
to confirm the new value or press (
)
to
restore to the previously selected number
• The aspect ratio markers are set relative to the image borders, except when the
scale mode is “viewport”. In the latter case the aspect ratio markers are defined as
if the input signal has an aspect ratio of 16:9.
4.2.5.9.4
How to set action safe area
• Press (
)
to open the safe area settings toolbox
• Choose if the action safe are needs to be defined relative to the ARM (Aspect Ratio
Markers) defined above, or the relative to the original image borders:
Move with the trackball to highlight the wanted option
Press (
)
or (
)
to confirm the highlighted option
• Choose by which standard the action safe area is defined. For more information
about these standard settings, please check the tables in the addendum. To select
the wanted standard:
Move with the trackball to highlight the wanted option
Press (
)
or (
)
to confirm the highlighted option
• To change the custom action safe area:
Move with the trackball to highlight one of the numbers behind “Hor” or “Ver”
Press (
)
or (
)
to select the highlighted number
To change the number, move with the trackball or type a number with the
numeric keypad
Press (
)
or (
)
to confirm the new value or press (
)
to
restore to the previously selected number
NOTE
:
The values depicted at “Hor” and “Ver” indicate the amount of percent that the area is reduced with
respect to the ARM or image borders.
4.2.5.9.5
How to set graphics safe area
• Press (
)
to open the safe area settings toolbox
• Choose if the graphics safe are needs to be defined relative to the ARM (Aspect Ratio
Markers) defined above, or the relative to the original image borders:
Move with the trackball to highlight the wanted option
Press (
)
or (
)
to confirm the highlighted option
• Choose by which standard the graphics safe area is defined. For more information
about these standard settings, please check the tables in the addendum. To select
the wanted standard:
Move with the trackball to highlight the wanted option
Press (
)
or (
)
to confirm the highlighted option
• To change the custom graphics safe area: