![background image](http://html1.mh-extra.com/html/barco/rhdm-2301/rhdm-2301_user-manual_3809077025.webp)
Barco - RHDM-2301 - User manual ____________________________________________________ 25
How to
3.3 How to view signals connected to the SDI input board
Figure 10: Input connectors SDI input board
The standard input board that is mounted in slot 1 is a SDI input board. The SDI input
board has two inputs that are separately connected with a loop-through output connector.
NOTE
:
The input signals are not available at the loop-through output connectors when the display unit is in
hard standby (Power LED = orange).
Up to 2 inputs can be applied to the SDI board simultaneously. In the table below the
possible combinations are shown:
To select a valid signal, open the
input selection toolbox
by pressing long (
) on the
button of the window in which the input signal has to be shown
or
.
The concept of selection and viewing of the valid signals is summarized in the figure
below:
Figure 11: Selection of inputs window 1 & 2
Input SDI board
Input 1
Input 2
Possible inputs
SDI
HDSDI
3Gb/s (optional)
SDI
HDSDI
3Gb/s (optional)
Dual link (optional)
IN
OUT
IN
OUT
INPUT 1
INPUT 2
A1
B1
S
L
O
T
1
INPUT 1
INPUT 2
WINDOW 1
WINDOW 2
ACTIVE WINDOW
is shown on screen
INPUT 1
INPUT 2
press
press
press
press