Barco R92112071 User Manual Download Page 175

Page: 175 / 184

Glossary

GLOSSARY

BFL

Back Focal Length

CCD

Constant Contrast Dimming

CEE7/7

European power plug to connect the power cord to the wall outlet.

DHCP

Dynamic host con

guration protocol. DHCP is a communications protocol that lets network administrators manage centrally and

automate the assignment of IP addresses in an organization’s network. Using the Internet Protocol, each machine that can connect
to the Internet needs a unique IP address. When an organization sets up its computer users with a connection to the Internet,
an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at each computer
and, if computers move to another location in another part of the network, a new IP address must be entered. DHCP lets a network
administrator supervise and distribute IP addresses from a central point and automatically sends a new IP address when a computer
is plugged into a different place in the network.

DNS server

Computers, Projectors, Touch panels connected to a network are referenced by their IP address. The only problem is that remem-
bering IP addresses is not easy. If you need to use hundreds of addresses then it will become impossible to remember them. This
is why domain names are created. Internet names (domain and host names) are just aliases to these IP addresses. When you use
an Internet address it is automatically translated to an IP address. In fact a program or device that translates those Internet names
to IP addresses is called a DNS Server.

ECR

Extended Contrast Ratio

Extended Contrast ratio allows to increase the contrast of the image while the light output decreases.

GLC

Gray Level Correction

American power plug to connect the power cord to the wall outlet.

Smearing

Smearing is a ’trail’ effect produced by fast moving objects in a displayed image. Any fast moving object will look blurred or smeared
along the direction of relative motion.

R59770198 BARCO SIM 7D 13/02/2013

171

Summary of Contents for R92112071

























































































































































































Search results

Summary of Contents for R92112071

Reviews:

Related manuals for R92112071

Brands by name

Popular brands

Barco R92112071, User Manual

Search results

Summary of Contents for R92112071

Reviews:

Related manuals for R92112071

Brands by name

Popular brands