Barco R92112071, User Manual

Page: 120 / 184

7. Advanced
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select AutoImage setup
Image 7-117
5. Press ENTER
A dialog box is displayed.
Image 7-118
6. Use the arrow keys to select the desired check box and press ENTER to activate or deactivate the item.
7.8.7 Smearing reduction (Optional)
Overview
• Introduction
• Enabling Smearing reduction
• Adjusting the phase
7.8.7.1 Introduction
Smearing
Smearing is a ’trail’ effect produced by fast moving objects in a displayed image. Any fast moving object will look
blurred or smeared along the direction of relative motion.
What can be done ?
Because of its inherent characteristics (LC response time), liquid crystal based display devices are subject to smearing on fast mov-
ing images. Because of its fast response time and refresh rate, LCoS displays are less sensitive to smearing than other comparable
raster scanning devices. However in order to decrease the smearing effect even more, a smearing reduction system is installed in
this projector. This smearing reduction system will reduce the ’trail’ effect in fast moving objects.
116 R59770198 BARCO SIM 7D 13/02/2013