Barco R92112071, User Manual

Page: 65 / 184

7. Advanced
• Limited scan: a windowing system is used to allow fast tracking.
The operation takes about 20 seconds (depending on
fi le)
• Full scan: tracking is done over the full range.
The operation takes about 1.5 minutes (depending on
fi le)
How to launch Auto Image?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Auto Image
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired fi le scan method
Image 7-14
7. Press ENTER
AutoImage acts on the active window. The image in the window may move and change in aspect during the
AutoImage process.
Auto Image can also be launched via the RCU with the dedicated AutoImage key.
7.4.3 Edit fi le
What can be done with the Edit fi le menu ?
The Edit fi le menu makes it possible to change the settings of the fi le according to the real settings of the connected source. Consult
the source speci fi cations before entering the data.
In this case a DVI source is used. A DVI source does not need any image fi le setting. All the fi elds are therefore
greyed out. See the dialog box below.
How to edit a fi le ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image fi les item
3. Press ↓ to Pull down the Image fi les menu
4. Use ↑ or ↓ to select Edit
R59770198 BARCO SIM 7D 13/02/2013 61