Barco R9040380, Owner'S Manual

Page: 233 / 247

C. Calibrate Measured Values
C. CALIBRATE MEASURED VALUES
Overview
• Calibrate Measured Values
C.1 Calibrate Measured Values
Necessary tools
Color meter (e.g. PhotoResearch 650 or LMT).
How to Start Calibrate Measured Values?
1. Put the color meter at the center of the image and switch to option X-Y-Z (X=Red, Y=Green, Z=Blue). (image C-1)
2. On the projector press the
MENU
key to activate the Menu bar.
3. Push the cursor key ← or → to highlight
Image
in the menubar.
4. Push the ↓ key to pull down the
Image
menu.
5. Push the cursor key ↑ or ↓ to highlight
Dynacolor
and press
ENTER
to select. (image C-2)
The Dynacolor dialog box will be displayed.
6. Push the cursor key ↑ or ↓ to highlight
Calibrate Measured Values
and press
ENTER
to select. (image C-3)
This will start up the calibration procedure.
Projector
Screen
Color Meter
Image C-1
Put the color meter at the center of the image and switch to option X-Y-Z (X=Red, Y=Green, Z=Blue)
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 229