Barco R9040380, Owner'S Manual

Page: 217 / 247

14. Service Menu
14. SERVICE MENU
Overview
• Options
• Version Table
14.1 Options
Options
This menu item is grayed out and will be implemented in the near future.
14.2 Version Table
What can be done?
This menu item gives an overview of the versions of all the different software blocks used by the projector:
Default program Main projector software used in default mode
Standard program Main projector software used in normal mode
Standard Cpu config Software used by the CPU
Standard Cpu Config Backup 00.11 Software used by the CPU (Backup)
PMP Config Software used on the PMP board
Backplane Config1 Software used on the Backplane
Backplane Config2 Software used on the Backplane
Character map Software used by the OSD
Bitmaps Software used by the OSD
Dvi Eeprom L1 Software used on the DVI input board
How to consult the Version Table?
1. Press the
MENU
key to activate the Menu bar.
2. Push the cursor key ← or → to highlight
Service
in the menubar.
3. Push the ↓ key to pull down the
Service
menu.
4. Push the cursor key ↑ or ↓ to highlight
Version Table
and press
ENTER
to select. (image 14-1)
The Version Table will be displayed. (image 14-2)
Image 14-1
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 213