Service Mode
7-5
5976025 BARCOVISION 708 200499
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Memory management
To select Memory Management :
1.
Push the cursor key
é
or
ê
to highlight Memory Management.
2.
Press
ENTER
The memory management menu will be displayed.
Within the memory management menu, the following items can be consultated or executed :
- copy a block
- delete a block
- delete all blocks
- all settings to midposition
- R & B convergence to mid
- Gr convergence mid (only if green convergence is available)
Copy a block
The copy a block function copies the settings of a selected block into the active block.
To copy a block :
1.
Push the cursor key
é
or
ê
to highlight Copy a Block.
2.
Press
ENTER
To copy the settings of a closed block to the block you are working on (active block),
1.
Push the cursor key
é
or
ê
to select a block.
2.
Press
ENTER
to copy the selected block.
All current settings will be overwritten with the settings of the block which is
copied.
A confirmation screen will be displayed.
3.
ENTER
to confirm.
EXIT
cancels the copy procedure and returns without copying the block.
Select with or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with or
<ENTER> to copy
<EXIT> to return.
COPY MODE
Nr. Src Fh Fv
inp
conf
1
1
15.6 50video
FC
2
3
31.2 60RGB3S R T
3
-
15.6 50intern FC
4
2
31.5 50RGB3S FC
5
-
33.7 60intern FC
6
7
8
Active block nr. 1
COPY BLOCK
All settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
Deletion of blocks
This item is password protected.
The delete function is used to clear all data (settings) from an adjustment block.
A delete can be given :
- block by block
or
- for all blocks.
Deleting block by block
The '
delete a block'
function deletes the settings of a selected block.
To Delete a Block :
1.
Push the cursor key
é
or
ê
to highlight Delete a Block.
2.
Press
ENTER
to display the delete mode.
3.
Push the cursor key
é
or
ê
to select the desired adjustment block.
4.
Press
ENTER
to delete the selected adjustment block.
A confirmation menu will be displayed.
5.
Press
ENTER
to confirm.
Press
EXIT
to cancels the deletion procedure
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with or
then <ENTER>
<EXIT> to return.
Select with or
<ENTER> to copy
<EXIT> to return.
DELETE MODE
Nr. Src Fh Fv
inp
conf
1
1
15.6 50video
FC
2
3
31.2 60RGB3S R T
3
-
15.6 50intern FC
4
2
31.5 50RGB3S FC
5
-
33.7 60intern FC
6
7
8
Active block nr.
1
DELETE BLOCK
The selected block
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
