Service Mode
7-4
5976025 BARCOVISION 708 200499
Change baudrate
The communication speed between projector and computer has 8 possible speeds. The baud
rate speed can be software set up. To set up the baudrate :
1.
Push the cursor key
é
or
ê
to highlight Change Baudrate.
2.
Press
ENTER
.
The following baud rates are available :
- 9600
- 4800
- 2400
- 1200
- 600
- 300
- 150
- 110
The actual baud rate will be highlighted. To change the baud rate:
1.
Push the cursor key
é
or
ê
to select the desired baudrate.
2.
Press
ENTER
to accept.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
<ENTER> to accept
<EXIT> to return.
BAUDRATE
Select new
baudrate :
9600
4800
2400
1200
600
300
150110
Select with arrow
keys ;
Power up mode
When pressing the power switch, the projector can start up in 'operating mode' or in 'stand-
by mode'.
Operating mode : the projector start up and displays image .
Stand-by mode : the projector start up in stand-by and waits until the stand-by button or a
digit key is pressed.
To change the Power up mode:
1.
Push the cursor key
é
or
ê
to highlight Power Up.
2.
Press
ENTER
to toggle between 'Operating' and 'Standby'.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE :
operating
BARCO LOGO
BARCO_logo
The BARCO logo can be added to the image, in overlay or in background, on any place on
the screen.
WARNING : Continuous use of the BARCO logo damages the RED CRT.
To add the BARCO logo or to change a setting in the BARCO logo menu :
1.
Push the cursor key
é
or
ê
to highlight BARCO_logo.
2.
Press
ENTER
to select.
The BARCO logo menu will be displayed on the screen. Within this menu, four toggle
settings are available.
Mode [ON/OFF] :
ON : BARCO logo will be displayed on the screen.
To position the logo on the screen, push the control disc up, down, to the left or to the right
until the desired position is reached.
OFF : No BARCO logo displayed on the screen.
Size [SMALL/LARGE] :
SMALL : Small BARCO logo will be displayed if mode is on.
LARGE : Large (double size) BARCO logo will be displayed if mode is on.
Background [ON/OFF] :
ON : BARCO logo will be displayed on a black background.
BARCO
OFF : BARCO logo will be displayed without any background.
BARCO
Orbiting [ON/OFF] :
ON : on the BARCO logo will orbit around it axis.
OFF : no orbit of the BARCO logo.
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with or
<ENTER> to toggle
<EXIT> to return.
BARCO LOGO
MODE :
ON
SIZE : SMALL
BACKGROUND : ON
ORBITTING : ON
You can move the logo
on the screen, using
the arrow keys.
WARNING : continuous
use of the BARCO logo
damages the RED CRT !
