Connections
3-3
5976025 BARCOVISION 708 200499
Connecting a S-Video source to port 2.
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS signals.
If a line doubler is built in :
the default position of this line doubler is ON (active), the video
input signal will be displayed as a non interlaced image (=
improved image stability).
To enable or to disable this line doubler function, enter the
adjustment mode and change the position of the ON/OFF
toggle switch (see Picture tuning in chapter 'Guided' adjust-
ment mode or 'Random access' adjustment mode).
Input selection
a. with the RCU : press digit button 2 or
b. with the local keypad.
(for access to the local keypad, see Local keypad in chapter
Location and function of controls.)
- press
ADJUST
key, the General access menu is displayed on the
screen.
- use the control disk to highlight
2
.
- press
ENTER
to select the highlighted source.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
COMM PORT
(8 00 peri pherals)
REMOTE
S
VIDEO
S-VIDEO
VCR S-VHS
Audio amplifier
Luma/Chroma
R
G(S)
B
R -Y
Y(S)
B-Y
RS232 OUT
RS232 IN
