6. Final Adjustment and Configuration
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
______________________________________________________________
6-13
Figure 6-17
Chromaticity diagram, CIE 1931
The ASIC needs to know the uncorrected color coordinates for red, green, blue and white as well as the relative lumens of
each color.
On the
Color Coordinate Adjustment
dialog this information is related to
Measured
.
(CAST provides this information by measuring the
factory colors
).
The ASIC then needs to know the target color coordinates for all primary colors, for all secondary colors, and for
white (R, G, B, C, M, Y, W: "7 primary colors processing")
On the
Color Coordinate Adjustment
dialog this information is related to
Desired
(CAST provides this information by determining the
Target
)