3. Mechanical setup
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
______________________________________________________________
3-13
MIR04
Place the front and bottom shielding, remove
the tape shielding and position the shielding on
to the structure. Use the drive fastener to fix
the shielding onto the corner brackets.
Make sure to use the nippled hammer bolts
and spring washers to assure proper grounding.
In case coated material is fixed with
In case coated material is fixed with
In case coated material is fixed with
In case coated material is fixed with
ha
ha
ha
ham
m
m
mmer bolts to the profile: Make sure to
mer bolts to the profile: Make sure to
mer bolts to the profile: Make sure to
mer bolts to the profile: Make sure to
use the nippled h
use the nippled h
use the nippled h
use the nippled hammer bolts and spring
ammer bolts and spring
ammer bolts and spring
ammer bolts and spring
was
was
was
wash
h
h
hers to provide proper groun
ers to provide proper groun
ers to provide proper groun
ers to provide proper ground
dd
ding
ing
ing
ing.