Barco MDSC-8231 User Manual Download Page 57

Page: 57 / 64

R5911692 /01

MDSC-8231

Indicates the device is approved according to the VCCI regulations.

Indicates the device is approved according to the KC regulations.

Indicates the device is approved according to the BSMI regulations.

Indicates the device is approved according to the PSE regulations.

Indicates the device is approved according to the RCM regulations.

Indicates the device is approved according to the EAC regulations.

Caution: Federal law (United Stated of America) restricts this device to sale by or on the
order of a licensed healthcare practitioner.

IS 13252 (Part 1)

IEC 60950-1

R-xxxxxxxx

www.bis.gov.in

Indicates the device is approved according to the BIS regulations.

Indicates the device is approved according to the INMETRO regulations.

Indicates the USB connectors on the device.

Indicates the DisplayPort connectors on the device.

Indicates the legal manufacturer.

Indicates the manufacturing date.

Indicates the temperature limitations

for the device to safely operate within specs.

Important information

Values for xx and yy can be found in the technical specifications paragraph.

Summary of Contents for MDSC-8231

































































Search results

Summary of Contents for MDSC-8231

Reviews:

Related manuals for MDSC-8231

Brands by name

Popular brands

Barco MDSC-8231, User Manual

Search results

Summary of Contents for MDSC-8231

Reviews:

Related manuals for MDSC-8231

Brands by name

Popular brands