Barco MDSC-8231, User Manual

Page: 39 / 64

R5911692 /01 MDSC-8231 39
5.3.11 Picture in Picture transparency
About Picture in Picture transparency
The available Picture in Picture transparencies range selectable for your display is between:
• 0: No transparency
• 10: Maximum transparency (roughly 37%)
To select Picture in Picture mode
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the PiP transparency submenu.
4. Select one of the required PiP transparency value and confirm.
5.4 Configuration menu
5.4.1 Information
About information
The available information items for your display are:
• Model (commercial type identification)
• SW package (display firmware identification)
• Main board release (hardware and firmware identification)
• Keyboard release (hardware and firmware identification)
• SDI module release (hardware and firmware identification)
• Serial Number (unit serial number)
• Main FPGA release (firmware identification)
To access information
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Information submenu.
5.4.2 Language
About languages
The OSD menu of your display is available in multiple languages.
To select the language
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Language submenu.
4. Select one of the available languages and confirm.
5.4.3 OSD Time-out
About OSD time-out
The OSD menu can automatically close after a certain time of inactivity after the last selection was made.
The available OSD time-out values for your display are:
• 10 Sec.
• 20 Sec.
• 30 Sec.
Advanced operation