Barco MDSC-8231, User Manual

Page: 38 / 64

R5911692 /01 MDSC-8231 38
5.3.8 Picture in Picture input
About Picture in Picture input
This function allows the display to show a second input source as an inset window inside the main source.
The possible Picture in Picture combinations between the Primary input (main source) and the Secondary
input (PiP image) is displayed in the following table.
Primary input Secondary input
DP 1.2 MST / 1.1 / Dual
HDMI 2.0
– 1
HDMI 2.0 – 2
12G-SDI (on SDI 1)
DVI
SDI 3 (*)
Gamma and Color temperature for the PiP Source are always set to Native and 6500 K
independently from the Transfer Function applied to the Primary input Source.
(*) SDI 3 is only available if the SDI configuration mode is Dual SDI.
To select Picture in Picture input
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the PiP Input submenu.
4. Select one of the available PiP inputs (or NONE) and confirm.
5.3.9 Picture in Picture mode
About Picture in Picture mode
The available Picture in Picture modes for your display are:
• Large PiP: 35% of display horizontal size in top or bottom of right corners
• Small PiP: 25% of display horizontal size in top or bottom of right corners
To select Picture in Picture mode
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the Picture in Picture Mode submenu.
4. Select one of the available Picture in Picture modes and confirm.
5.3.10 Picture in Picture position
About Picture in Picture position
The available Picture in Picture positions for your display are:
• Bottom right
• Top right
To select Picture in Picture position
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the PiP Position submenu.
4. Select one of the available PiP positions and confirm.
Advanced operation