Barco MDSC-8231, User Manual

Page: 37 / 64

R5911692 /01 MDSC-8231 37
(*1) SDI 3 is only available if the SDI configuration is Dual SDI.
(*2) The SDI configuration is Single SDI-1 / Single SDI-3.
(*3) The SDI configuration is Quad-SDI.
To select the failover input
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the Failover Input submenu.
4. Select one of the available failover inputs and confirm.
5.3.7 Picture and Picture input
About Picture and Picture input
This function allows the display to show a second input source on the left side of the display. The Primary input
(main source) is still displayed on the right half of the screen.
The possible Picture and Picture combinations between the Primary input (main source) and the Secondary
input (PaP image) is displayed in the following table.
Primary input Secondary input
DP 1.1
• HDMI 2.0 – 1
• HDMI 2.0 – 2
• DVI
• SDI 3 (*)
HDMI 2.0 – 1
HDMI 2.0 – 2
• DP 1.1
• DVI
• SDI 3 (*)
DVI
SDI 3 (*)
• DP 1.1
• HDMI 2.0 – 1
• HDMI 2.0 – 2
Both primary and secondary input are limited to FHD resolution max.
The Video Parameters applied to the Primary input Source are also applied to the Secondary input.
The 2nd source keeps the same image size (Native/Aspect) as the Primary input Source.
(*) SDI 3 is only available if the SDI configuration mode is Dual SDI.
To select Picture and Picture input
1. Bring up the OSD main menu.
2. Navigate to the Input Select menu.
3. Enter the PaP Input submenu.
4. Select one of the available PaP sources (or NONE) and confirm.
Advanced operation