Barco MDFC-8232 3SW User Manual Download Page 59

Page: 59 / 70

R5913170 /00

MDFC-8232

E346057

Indicates the device is approved according to the UL Recognition regulations.

E346057

MEDICAL

–

GENERAL MEDICAL EQUIPMENT

AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH ANSI/AAMI AS60601-1:2005/(R)2012, CSA CAN/CSA-C22.2
NO. 60601-1:14

E346057

Indicates the device is approved according to the UL regulations for Canada and US.

Indicates the device is approved according to the UL Demko regulations.

Indicates the device is approved according to the CCC regulations.

Indicates the device is approved according to the VCCI regulations.

Indicates the device is approved according to the KC regulations.

Indicates the device is approved according to the BSMI regulations.

Indicates the device is approved according to the PSE regulations.

Indicates the device is approved according to the RCM regulations.

Indicates the device is approved according to the EAC regulations.

Caution: Federal law (United Stated of America) restricts this device to sale by or on the
order of a licensed healthcare practitioner.

IS 13252 (Part 1)

IEC 60950-1

R-xxxxxxxx

www.bis.gov.in

Indicates the device is approved according to the BIS regulations.

Indicates the device is approved according to the INMETRO regulations.

Important information

Summary of Contents for MDFC-8232 3SW







































































Search results

Summary of Contents for MDFC-8232 3SW

Reviews:

Related manuals for MDFC-8232 3SW

Brands by name

Popular brands

Barco MDFC-8232 3SW, User Manual

Search results

Summary of Contents for MDFC-8232 3SW

Reviews:

Related manuals for MDFC-8232 3SW

Brands by name

Popular brands