Barco MDFC-8232 3SW, User Manual

Page: 20 / 70

R5913170 /00 MDFC-8232 20
3.3 Power supply connection
To connect the power supply
1. Connect the supplied external DC power supply unit to the +24 VDC power input of your display.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper
power cord delivered in the packaging.
Image 3 – 4
CAUTION: To avoid risk of electric shock, the external DC power supply must be connected to a
mains with protective earth. The ground connection on the display ’ s DC power input connector has
no protective earth function. The MDFC-8232 display protective earth connection is provided via a
dedicate pin (see next steps).
Protective earth
Earth the MDFC-8232 by connecting the protective earth pin to a grounded outlet by means of a yellow/green
AWG18 wire (maximum admitted cable length according to national regulation requirements).
Image 3 – 5
CAUTION: The display must be earthed.
Potential equalization
When potential equalization between the display and other devices is required then connect the potential
equalization pin (POAG) to the potential equalization terminal of the equipment.
Image 3 – 6
Display installation