Barco MDFC-8232 3SW, User Manual

Page: 58 / 70

R5913170 /00 MDFC-8232 58
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the MDFC-8232 as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
4
W
Separation distance according to frequency of transmitter
150kHz to 80MHz
d=1.2
√ P
80MHz to 800MHz
d=1.2
√ P
800MHz to 2.5GHz
d=2.3
√ P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection form structures, object and people.
7.6 Cleaning and disinfection
Instructions
• Be sure to unplug the power cord from the mains when cleaning your LCD monitor.
• Take care not to scratch the front surface with any hard or abrasive material.
• Dust, finger marks, grease etc. can be removed with a soft damp cloth (a small amount of mild detergent
can be used on the damp cloth).
• Wipe off water drop immediately.
Possible cleaning solutions
• Isopropyl alcohol 90%
• Ethanol 70%
• Flux
• Wurth, TFT-Reiniger
• 1.6% ammonia
• Sodium hypochlorite 10%
• Peroxide hydrogen 10%
7.7 Explanation of symbols
Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
Indicates the device meets the requirements of the applicable EC directives/
regulations.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B).
Important information
4: For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter. Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.