Video Wall Installation Guide
NEC Display Solutions
Guide
Settings and Adjustments for MultiSync® UN552S | UN552VS | UN552 | UN552V |
UN552A | UX552S | UX552 | UN492S | UN492VS | UN462A | UN462VA
A guide to trouble-free, efficient
video wall installation
This guide will assist you in setting up your video wall
quickly and correctly in order to benefit fully from the
specially designed video wall features. Please read the
instructions carefully and consider all the steps in order to
achieve the best results.
Attention: For unboxing and physical monitor handling,
please refer to the printed Installation Manual included in
each display carton box.
AUTO SETUP Principle
Any input signal up to UHD resolution can be distributed across the
video wall by using the Tile Matrix function. The UNxx2 displays provide
several “AUTO SETUP” functions for simple and fast video wall setup
and management. To enable these functions to operate correctly, it is
necessary for DisplayPort, HDMI and LAN cables to be daisy chained as
illustrated below.
Primary monitor - input/output mapping
For uncompromising visual results, no signal conversion is necessary.
Refer to the mapping table between input and output interfaces.
Depending on the required input source, use HDMI and/or DisplayPort
Daisy Chain cabling.
DisplayPort OUT
HDMI OUT
INPUT
OUTPUT
DisplayPort
OPS SLOT2 (DisplayPort)
HDMI
DVI
OPS SLOT2 (HDMI)
Integrated Media Player
PRIMARY
MONITOR
ID: 1
ID: 2
ID: 3
ID: 6
ID: 5
ID: 4
ID: 7
ID: 8
ID: 9
DisplayPort
HDMI
OPS
Media Player
LAN
1
UNxx2/UXxx2 DAISY CHAIN: INPUT / OUTPUT MAPPING
