Barco LED-PRO, User Manual

Page: 100 / 186

86 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
içÖç
From the Expert Mode Menu , select Effects to display the Logo Menu , which enables
you to save and delete a LOGO. LED-PRO stores one logo in non-volatile memory.
Figure 4-69. Logo Menu
Following are descriptions of each menu function:
•
Capture Logo
•
Delete Logo
•
Logo Present
`~éíìêÉ=içÖç
Scroll to the Capture Logo function and press SEL to save the current “active” image as
the LOGO.
Note that you can also capture a LOGO by pressing and hold the desired input button, then
pressing the
LOGO button. In Chapter 2, refer to the “ About the LOGO ” section on
page 14 for more information.
aÉäÉíÉ=içÖç
Scroll to the Delete Logo function and press SEL to delete the current LOGO from
memory. The front panel LOGO button will then display Internal Black when pressed.
içÖç=mêÉëÉåí
The Logo Present line indicates current LOGO status:
•
Yes — an image is present in Logo memory.
•
No — a logo is not present in memory. Internal black will be displayed.
L O G O
> C a p t u r e L o g o
n / a
D e l e t e L o g o n / a
L o g o P r e s e n t N o
Tip Use the Freeze function to capture a frame of video, then use
the Capture Logo function to save it. Refer to the “ Freeze ”
section on page 87 for details.
Note The Capture Logo and Delete Logo functions are not
available (n/a) if the LOGO button is currently selected.