Barco LED-PRO, User Manual

Page: 130 / 186

116 LED-PRO • User’s Guide
5. Upgrading Software
Serial Upgrade Method
14. On LED-PRO, perform a factory reset. Press SETUP , select Factory Reset , and
then confirm. In Chapter 4, refer to the “ Factory Reset ” section on page 52 for
additional details.
15. On LED-PRO, verify that the new software has been loaded correctly. Press
SETUP , then navigate to the Software Version Menu by selecting Expert Mode
> Software Version .
Figure 5-4. Software Version Menu
This completes the software upgrade procedure.
Warning Use caution when performing this step, as all saved files will
be erased.
S O F T W A R E V E R S I O N
V e r s i o n 2 . 0 0