Barco LED-PRO, User Manual

Page: 121 / 186

LED-PRO • User’s Guide 107
4. Operation
Using the Input Position Menu
s=mçëáíáçå
On the Input Position Menu , select V Position to adjust (in lines) the start of the input
video's active area from V sync.
s=páòÉ
On the Input Position Menu , select V Size to adjust (in lines) the size of the active area.
p~îÉ=`çåÑáÖ
From the Input Position Menu , select Save Config to display the Save Config As Menu ,
which allows you to save and name up to 64 input configurations.
Figure 4-89. Save Config As Menu (sample)
Please note the following important points regarding input configurations:
•
When you save input configuration parameters, they are stored in non-volatile
memory for each input source. If you do not save the parameters, the information
will not be restored upon the next system power up sequence.
•
A filename may include up to 19 characters.
„
To save an input configuration:
1. Scroll to the filename field (e.g., File1 ) and press SEL . The navigation cursor ( > )
changes to the edit cursor ( # ), allowing you to edit the first character.
2. Choose a character by turning the knob, and “accept” it by pressing SEL . This
action also selects the next character for editing.
3. Repeat step 2 for all desired characters.
4. When data entry is complete, press SEL again. The filename will be truncated up
to the current character position.
S A V E C O N F I G A S
> F i l e 1
S a v e C o n f i g
Note This function is the same as the Save Config function located
in the Input Setup Menu ( SETUP > Expert Mode > Input ).
It is also located here for operator convenience.