Barco FLX-24, Installation Manual, Page: 25 / 76

3. Components of an FLX display system
Cables used with the FLX-NNI Controller
The FLX-NNI Controller unit comes with an EU power cord and a US power cord.
Image 3-12 Image 3-13
Barco offers three lengths of NNI cables (HDMI plugs with latches) to connect the FLX-NNI Controller units with each other. The
different lengths are 1 meter, 5 meter and 10 meter. Note that one NNI cable of 1 meter is delivered with the FLX-NNI Controller.
Image 3-14
NNI cable of 1 meter with latch (
R9854800 : 5 pieces).
Image 3-15
NNI cable of 5 meter with latch (
R9854790 : 5 pieces).
Image 3-16
NNI cable of 10 meter with latch (
R9854860 : 5 pieces).
To connect the output ports of the FLX-NNI Controller with the FLX-HUB units Barco offers FLX-data cables with RJ45 plugs which
are equipped with IP66 protection shells. The FLX-data cables are not included because the length of these cables vary from
application to application. There are three lengths available: 20 meter, 50 meter and 100 meter.
Futhermore, Barco offers also an IP66 upgrade kit for the RJ45 plugs of a standard network cable. The standard network cables
used must be of the
Cat 5 - STP type. Note that the maximum allowed distance between FLX-NNI Controller and FLX-HUB is 100
meter. Only the RJ45 plug at the side of the FLX-HUB requires IP66 protection shells.
Image 3-17
FLX-Data cable with IP66 protection shells for the RJ45
plugs (
R9899436 : 20 meter; R9899437 : 50 meter;
R9899438 : 100 meter).
Image 3-18
IP66 protection shells for the RJ45 plugs of the FLX-Data
cable (
R9856140B10 : 10 pieces).
R59770420 FLX-24 21/12/2009 21