Barco FLX-24, Installation Manual, Page: 14 / 76

2. Installation requirements
2.1 Mechanical requirements
Mechanical requirements for the FLX-24 pixel
Barco offers different carrying systems for the FLX-24 pixel such as the FLX-P50, FLX-P100, FLX-N100, etc. These standard FLX
carrying systems allows a creative,
fl exible, fast and easy set up of the FLX-24 pixels. The mechanical installation requirements
depend on the FLX carrying system used. Consult the installation manual, which comes with the FLX carrying systems, to know the
mechanical requirements of the FLX carrying system.
Next to the standard FLX carrying systems that Barco offers, you can design your own FLX carrying solution. The illustration below
shows the cutting dimensions for the FLX-24 pixel. For more information or help about FLX-24 pixel support grids, contact Barco.
Alignment of the FLX-24 pixels
It is recommended that all pixels of the same display are equally oriented to avoid color deviations when looking at the display under
extreme viewing angels. There are two solutions to align the FLX-24 pixels easily.
1.
The fi rst solution is using a support plate with a (keyhole) cutout of the top side of the FLX-24 pixel. Note that the top side of
the FLX-24 pixel has a lid which can be used to orient all pixels equally. The drawing below shows the cutout dimensions (in
mm) required for the top side of the FLX-24 pixel.
5,3
R0,1
R0,5 (2x)
Ø22,8
Ø19,3
Image 2-1
2. The second solution is using a support plate with one or two raised edges for the FLX-24 pixel socket. Note that the bottom
side of the FLX-24 pixel socket has two straight edges (in parallel) which can be used to align the pixel socket. The center of
the bottom side of the FLX-24 pixel socket is provided with a M3 mounting hole. The maximum depth of this mounting hole is
6mm. The drawing below shows the dimensions (in mm) required for the bottom side of the FLX-24 pixel socket.
Ø24
M3
24
12
12
24
12
12
Image 2-2
The metal plate where the pixel or pixel socket is mounted on, should be 1,5 mm thick. It is recommended to brush the support grid
with grain 120 to smooth away all burns.
C
AUTION
:
Make sure when making your own support grid for the FLX-24 pixel that the support grid is pro-
vided with the necessary attachment points to fasten the support grid.
10 R59770420 FLX-24 21/12/2009