Barco FLM R22+, User Manual

Page: 18 / 243

2. General
2.4 FLM fl ight case
Introduction of the FLM fl ight case
The FLM fl ight case is designed to transport the FLM R22+ in a safe and secure manner. The four caster wheels, provided with
breaks, and the eight handles make the FLM fl ight case easy to handle. The fl oor of the fl ight case wagon is equipped with two
small covered compartments to store the remote control and the rigging clamps. Furthermore, three Velcro strips are attached to
the bottom for fastening the power cord of the projector.
Image 2-4
FLM
fl ight case ( R9854510 ).
The dimensions of the FLM fl ight case are optimal for maximum utilization of the fl oor area of a truck. The cover of the FLM fl ight
case has four stacking dishes, which allows to stack the fl ight cases.
2400 mm
16
00
m
m
Image 2-5
W
ARNING
:
Maximum stack two (2) FLM fl ight cases high. Never higher.
C
AUTION
:
Prior to inserting projector in
fl ight case turn in the adjustable feet and interlocking adapters fully.
2.5 Projector con fi gurations
The different con fi gurations
Depending on the installation the projector can be mounted in different ways, the 4 different con fi gurations are:
1. Front / Table (F/T)
2. Front / Ceiling (F/C)
3. Rear / Table (R/T)
4. Rear / Ceiling (R/C)
Front projection
The projector is installed, either in a table mount or ceiling mount con fi guration, at the same side of the screen as the audience.
14 R59770179 FLM R22+ 15/03/2010