Barco FLM R22+ User Manual Download Page 134

Page: 134 / 243

12. Alignment menu

Image 12-54

12.6 Contrast enhancement

Purpose

Increase the contrast for all video and data sources.

How to change

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Alignment

and press

ENTER

3. Use the

▲

▼

key to select

Contrast enhancement

and press

ENTER

The current selected contrast setting is indicated with an arrow.

4. Use the

▲

▼

key to select the desired setting and press

ENTER

The following settings are possible:

Normal contrast

High contrast

Custom

any value between normal and high contrast can be selected.

Image 12-55

Image 12-56

Image 12-57

5. When

Custom

is selected, the contrast menu is displayed.

6. Use the

▲

▼

key to select the desired adjustment and press

ENTER

. Press

EXIT

to return.

Image 12-58

12.7 Blanking

What can be done ?

Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking.

130

R59770179 FLM R22+ 15/03/2010

Summary of Contents for FLM R22+




















































































































































































































































Search results

Summary of Contents for FLM R22+

Reviews:

Related manuals for FLM R22+

Brands by name

Popular brands

Barco FLM R22+, User Manual

Search results

Summary of Contents for FLM R22+

Reviews:

Related manuals for FLM R22+

Brands by name

Popular brands