1. F70 / F90-series multifunctional frame
1
Image 1-25
1
Locking pin
Note:
Even if not all pins are necessary in your current setup, it is important to keep all locking pins to their respective rigging
frame for future use.
3. Stack the multifunctional frames. Make sure the stacking pins of both frames are aligned.
2
3
Image 1-26
2
Lower stacking pins
3
Upper stacking pins
4. Install a locking pin (reference 1, image 1-27) through the overlapping hole of both stacking pins.
1
x4
Image 1-27
5. Repeat the previous step for each overlapping corner of all stacked rigging frames.
R5906768 F70 / F90 MULTIFUNCTIONAL FRAME 22/11/2017
11
