1. F70 / F90-series multifunctional frame
C
AUTION
:
When using single point suspension (both ceiling or portrait mode), it is not allowed to incline the
frame for more than 20° towards the horizon.
How to suspend from a truss, using the rigging clamps
1. Measure the distance between the two used support bars of the truss, using the center tube as reference.
X mm
Image 1-30
Example of truss
2. Turn the projector upside down and install the rigging clamps, according the measured distance and secure this position. Ensure
that the rigging points are symmetrically lined up, so that the projector will hang in balance.
X mm
Image 1-31
Example of clamps installation
Warning:
Always use four (4) rigging points, equally spread, to suspend the projector.
3. If two projectors are suspended from each other, use the method described in "Stacking multiple projectors using the multifunc-
4. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby
the rigging clamps mounted on the projector.
R5906768 F70 / F90 MULTIFUNCTIONAL FRAME 22/11/2017
13
