1. F70 / F90-series multifunctional frame
1
Stacking pin
2
orientation rod M3 + M3 nut
3
Stacking hole
4. Mount the M6 set screws. Use a 3 mm Allen wrench.
Caution:
Use suf
fi
cient high strength threadlocker on the set screws.
Image 1-12
Image 1-13
5. Remove the orientation rod + nut
How to
fi
nish the installation
1. Make sure that all screws are tightened.
2. Install the four locking pins (reference 1 image 1-14) in the top stacking pins.
1
1
1
Image 1-14
Note:
Skip this step if you immediately are going to stack or suspend multiple rigging frames.
1.5
Installing the projector onto the multifunctional frame
Some illustrations show the F90 projector. Nevertheless, the same principle is valid for F70.
Necessary tools
Torque Wrench with high 5 mm Allen socket
R5906768 F70 / F90 MULTIFUNCTIONAL FRAME 22/11/2017
7
