![background image](http://html1.mh-extra.com/html/barco/f70-series/f70-series_installation-manual_3942203012.webp)
1. F70 / F90-series multifunctional frame
Necessary parts
•
Rigging frame cardboard packaging
•
Hex screws with socket head M6 x 25 (x4)
•
Spring washer M6 (x4)
•
Plain washer M6 (x4)
•
Hex screw with button head M8 x 20
•
Spring washer M8
•
Plain washer M8
•
Low head socket cap screw M8 x 25 (x4)
•
Plain washer M8 (x4)
C
AUTION
:
Don’t tighten the
fi
ve hex screws of the frame until you’ve positioned all screws into the projector.
How to install the projector onto the multifunctional frame?
1. Set up the packaging in such a way the projector can be placed upside down on it. Do this as illustrated.
Image 1-15
Image 1-16
2. Place the projector on the packaging, upside down.
Note:
Make sure that the openings in the bottom cardboard are left open for the frame itself.
3. Place the rigging frame over the projector as illustrated. Align the mounting holes of the rigging frame to the mounting holes of
the projector.
Image 1-17
Image 1-18
4.
For the F70 Projector:
Mount the four low head socket cap screws M8 x 25 (reference 1) + plain washer (reference 2) on the
bottom of the rigging frame to tie the two together.
Tighten the screws with a torque of 8,4 Nm
.
8
R5906768 F70 / F90 MULTIFUNCTIONAL FRAME 22/11/2017