5. Lenses & lens holder
5.4
Lens installation
How to install a lens
1. Remove the foam rubber in the opening of the lens holder if not removed yet.
2. Take the lens assembly out of its packing material and remove the lens caps on both sides.
3. Place the lens holder in the “unlocked” position by moving the lens lock handle (1) towards the lens power supply socket (2).
1
2
3
Image 5-7
Unlock lens holder
4. Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).
Note:
The lens holder is placed default in the On-Axis position at factory.
5. Gently insert the lens in such a way that the lens connector matches the socket.
Image 5-8
Mount lens
6. Insert the lens until the connector seats into the socket.
-
the pin (3) on the lens holder matches with the sleeve in the lens.
-
the connector seats into the socket (2)
Warning:
Do not release the Lens yet, as the Lens may fall out of the Lens Holder.
R59770495 DP2K-23B 30/04/2010
49
Summary of Contents for DP2K-23B
