3. Physical installation
3.6
Connecting a UPS to the projector electronics
W
ARNING
:
Only use UPS units which are suitable for the DP2K-23B projector. See chapter ”General”, “In-
stallation requirements” for more information about the requirements of the UPS.
How to connect the UPS
1. Install the UPS according to the instructions of the manufacturer and the local regulations.
2. Connect the power output cord from the UPS unit to the UPS inlet socket of the projector (right socket).
Connect directly (A) or drag the cable behind the front cover so that the front cover can be removed without removing the UPS
INLET cable (B).
1
2
A
B
Image 3-11
UPS connection
3. Secure the UPS inlet socket with a
fi
xation spring. Handle as follow:
-
Squeeze the
fi
xation spring together.
-
Slide the
fi
xation spring on the
fi
xation pins while squeezing together and push it against the power plug.
-
Release the
fi
xation spring.
4. Install on the power outlet the second
fi
xation spring to prevent losing it (2).
C
AUTION
:
The electrical connection with the UPS INLET socket of the projector must be done with a certi
fi
ed
AC power supply cord (minimum 0,75 mm² or 18 AWG and minimum 300V)
C
AUTION
:
Do not use the power OUTLET socket of the projector to provide power to other equipment!
26
R59770495 DP2K-23B 30/04/2010
Summary of Contents for DP2K-23B
