4. Lamp & lamp house
2
Image 4-17
Secure UV blocker
5. Install the anode wire lug (reference 1) upon the anode socket inside the Lamp House as illustrated. Use an Allen torque key set
to
9 Nm
(6.64lbf*ft) to secure the bolt (reference 3). Place a
fl
at washer (reference 2 between the bolt and the wire lug.
Warning:
Make sure that there is no tension on the anode wire of the xenon lamp.
1
2
3
1
2
3
9 Nm
Image 4-18
6. Check the cathode connection inside the lamp house. Use an 22 mm open-end wrench to hold the
fi
rst nut while fastening the
second nut on the rod with a torque of
25 Nm
(18,4 lbf*ft) using a torque wrench with 22 mm hexagon socket. Ensure that there
is a
fl
at washer at both sides of the wire lug.
Caution:
These cathode connections must be checked with every lamp change!
25 Nm
Image 4-19
Cathode connection check
7. Secure the xenon lamp cathode with the hexagon socket head cap screw (reference 9) and washer (reference 10) as illustrated.
Fasten the screw with a torque of
5 Nm
(3,7 lbf*ft). Use a torque wrench with a 5 mm Allen socket.
Caution:
Make sure that both pins (reference 11) of the cathode adapter remain engaged in the foreseen slots
38
R59770495 DP2K-23B 30/04/2010
Summary of Contents for DP2K-23B
