Barco DP2K-23B, Installation Manual, Page: 86 / 137

9. Projector registration
9.3 Registration of new projector
Possible login types
A projector can be registered by the following persons, each with its own login:
• installer
• owner
• Installer/owner
Depending on your login type, some steps are not necessary in the registration procedure. Follow the wizard as displayed on the
screen. The procedure below gives an overview of all possible steps which can be displayed.
How to register
1. Go to Barco’s Partnerzone on https://my.barco.com .
2. Login into the partnerzone.
If you are not yet registered, click on Sign in here and follow the instructions. With the created login and password, it is possible
to enter the partnerzone where you can upload the certi fi cate.
When your login is correct, the digital cinema partnerzone start page is displayed.
Click Registration DC projector and select Register a new DC projector . The fi rst registration page will be displayed.
Image 9-2
Start registration
3. Click Browse to locate the certi fi cate fi le. Select the fi le and click Open .
The fi le is fi lled out next to XML fi le . Click >> Next to continue.
Some checks are done on the certi fi cate fi le. When the fi le is correct and not yet uploaded, the next registration page is displayed.
4. Fill out the Technical Data page.
80 R59770495 DP2K-23B 30/04/2010