CVM 2
CVM
2
KEYBOARD EXTENSION
Color Temp.
NTSC setup elim.
Sync Fixed Ext.
Input Format
To return without
To return with saving
CLEAR
ENTER
I
6500
YES
NO
RGB
saving
KEYBOARD EXTENSION
Color Temp.
6500 K
NTSC setup elim.
Input 1 system
Input 2 system
Input 3 system
Safe area
To return without saving :
To return with saving
YES
D1
D1
D2/NTSC
OFF
CLEAR
ENTER
KEYBOARD EXTENSION
If an Analog Component Input board is installed and via the
Configuration Menu, the input is programmed for
"COMPONENT
MODULE",
you get next Keyboard Extension menu :
If a Digital Input board is installed and via the Configuration Menu,
the input is programmed for
"DIGITAL MODULE",
you get next
Keyboard Extension menu :
6500 K / 3200 K / 9300 K / A / B
NO / YES
Only active when a NTSC signal is applied.
NO / YES
If set YES, the monitor is forced into
external synchronization for RGB input.
RGB, Y/R-Y/B-Y, S-VHS
Dl, D2/PAL, D2/NTSC
ON / OFF
This is a digitally
generated pattern. only
available when a digital input is selected.
Color Temp. :
NTSC setup elim.:
Sync Fixed Ext.:
Input Format :
Input X system :
Safe area :
Press UP or DOWN to move the red field.
Press TOGL to modify data in the red field :
Press CLEAR to return without saving.
Press ENTER to return with saving.
The monitor holds the parameters set via the Keyboard Extension
till they are modified again. Note that colour temperature selection
can also be modified when pressing CAL (6500 K) or PRE .
18
