FUNCTION SWITCHING MODE
SW 1
SW 2
CAL
SCAN FORMAT
To return without saving :
To return with saving
CLEAR
ENTER
MONITOR CONFIGURATION (continued)
For
"FUNCTION SWITCHING",
you get e.g. next menu :
For each of the two switches SW1 and SW2, you can select using
the TOGL key between :
INP1-INP2
INP1-INP3
INP1-INP4
INP2-INP3
INP2-INP4
INP3-INP4
CAL
PRESET
COLOR
APERTURE
COMB
SIZE
SCAN FORMAT
SYNC SOURCE
SYNC TIME CT
SCAN DELAY
Note that for SW1 and SW2 you have to make a different selection,
otherwise you get the message when entering : "SELECT
DIF-
FERENT ITEMS FOR THE TWO SWITCHES".
The front panel and the remote control are active at the same time.
A remote function selection is carried out from the instant the
status of one of the two switches SW1 and SW2 is modified.
For input selection, the left input marked in the red field corre-
sponds to the open state of the switch, the right input to the closed
state. Toggle functions as
"COLOR"
and
"SCAN DELAY ONLY"
look to a change of the status of the corresponding switch.
21
