STATUS (PRESET INPUT 1)
Contrast
Brightness
Saturation
Hue
Volume
Color
Aperture
Comb
NTSC setup elim.
Size
Sync Source
Sync Time Ct
Scan Delay
Color Temp.
RGB Drive
100
100
100
100
050
ON
OFF
OFF
NO
UNDERSCAN
INTERNAL
SLOW
NORMAL
6500 K
RGB
To return without saving :
To return with saving
CLEAR
ENTER
STATUS (PRESET INPUT X)
Via this menu, you can program the Preset of an input.
When this menu comes up, it shows the actual status of the moni-
tor, not the preset values. This status can be stored as preset for
the selected input, or you can first modify it and then store.
Press UP or DOWN to move the red field.
Press TOGL to modify data in the red field.
Press CLEAR to return without saving.
Press ENTER to return with saving.
Contrast Brightness Saturation Hue : 050
to
200
Volume :
000
and
050
to
200
Color :
ON, OFF/FILTER, OFF/FULLBW
Aperture :
OFF / ON
NTSC setup elim.:NO / YES
Size :
UNDERSCAN / OVERSCAN
Sync Source :
INTERNAL / EXTERNAL
Sync Time Ct :
SLOW / FAST
Scan Delay
:
NORMAL / H-DELAY / V-DELAY / HIV DELAY
Color Temp. :
6500 K / 3200 K / 9300 K / A / B
RGB Drive :
RGB / RED only / GREEN only / BLUE only /
RED off / GREEN off / BLUE off
The monitor holds the parameters set for preset till they are modified
again.
Note also that when you leave this menu and return to normal picture,
when you want to see the monitor in its preset state, you have to
press
PRE
first.
22
