CVM 2037
CVM 2051
GEOMETRY (continued)
Howto adjust geometry?
Set the monitor ready for geometry alignment of 4/3 underscan
.
Adjust the monitor for 4/3 underscan.
Copy the alignment to overscan (press SIZE).
Select 4/3 overscan (press COMB).
Align the monitor for 4/3 overscan.
Copy the alignment to 16/9 (press DEG).
Select 16/9 underscan (press APT and MONO).
Adjust the monitor for 16/9 underscan.
Copy the alignment to overscan (press SIZE).
Select 16/9 overscan (press COMB).
Finally adjust the monitor for 16/9 overscan.
Press ENTER to save if the alignment is satisfying.
The above mentioned adjustments are independent.
When geometry is correctly aligned completely or partly, it can be
saved by pressing
ENTER.
Note that the previous alignment will
be overwritten.
You can always exit the geometry alignment mode without saving,
by pressing CLEAR.
36
