White uniformity = 127
SERVICE PAGE 6500 K
Contrast
100
Lowlights red
Lowlights green
Lowlights blue
Highlights red
Highlights green
Highlights blue
101
204
202
204
106
108
120
To select factory value :
To return without saving :
To return with saving
CAL
CLEAR
ENTER
ALIGNMENT (continued)
Service page
SERVICE PAGE
6500 K
1
3200 K
2
9300 K
3
COL TEMP A
4
COL TEMP B
5
White uniformity (6)
Setup elimination 7
Five Service Pages are available, one for each colour temperature.
They give an overview of the inside control codes for Contrast,
Lowlights and Highlights. Values go between 000 and 255.
The Service Page also permits the manual modification of each of
the displayed values.
Press UP to move the red field.
Use numeric keys 0 to 9 to modify a value between 000 and 255.
Press CAL to set a selected value to the factory choosen center
value (mainly 127).
Press CLEAR to return without saving.
Press ENTER to return with saving.
The item "White uniformity" is available in software but needs hard-
ware inside the monitor, a.o. an additional coil around the picture
tube, which is optional. It is a compensation of magnetic fields
which may influence the white uniformity of the picture.
Apply a full white field video signal and use the UP and DOWN
keys to get a picture as uniform as possible.
Press CLEAR to return without saving. To return with saving, press
ENTER and you get a warning screen :
31
