Barco Coronis Uniti, User Manual

Page: 33 / 70

33 K5902079 /11 Coronis Uniti
4.13 Luminance target
About the luminance target
The luminance target of your Coronis Uniti is adjustable over a predefined range. When you change the
luminance target, the display will adjust its backlight to reach the target.
To set the luminance target:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration menu.
3. Enter the Luminance Target submenu.
4. Set a luminance target value as desired and confirm.
The default, factory calibrated luminance value is available in the technical specifications table. The
guaranteed backlight lifetime is valid for this setting.
4.14 Color presets
About color presets
The available color preset settings for your display are:
• Clearbase: Simulation of the clearbase film color temperature.
• Bluebase: Simulation of the bluebase film color temperature.
• User: When selecting the User color temperature setting, you will be able to manually define the X and Y
coordinates or the display color temperature in separate submenus.
• Native White: The native, unmodified color temperature of the LCD panel.
To select a color preset:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Color Presets submenu.
4. Select one of the available Color Presets and confirm.
4.15 Color temperature
About color temperature:
It is possible to change the color temperature of your display.
Color temperature can only be changed on your display when color presets is set to User . Please
refer to “Color presets”, page 33 to do this.
To change the color temperature:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Calibration > Color Settings menu.
3. Enter the Color Definition submenu.
4. Select Color Temperature and confirm.
5. Enter the Color Temperature submenu.
6. Set the Temperature value as desired and confirm.
Advanced operation