Barco Coronis Uniti User Manual Download Page 62

Page: 62 / 70

K5902079 /11

Coronis Uniti

Indicates the device is approved according to the UL regulations for
Canada and US

E352529

Indicates the device is approved according to the UL regulations for
Canada and US

Indicates the device is approved according to the UL Demko regulations.

Indicates the device is approved according to the CCC regulations.

Indicates the device is approved according to the VCCI regulations.

Indicates the device is approved according to the KC regulations.

Indicates the device is approved according to the BSMI regulations.

Indicates the device is approved according to the PSE regulations.

Indicates the device is approved according to the RCM regulations.

Indicates the device is approved according to the EAC regulations.

Caution: Federal law (United Stated of America) restricts this device to
sale by or on the order of a licensed healthcare practitioner.

IS 13252 (Part 1)

IEC 60950-1

R-xxxxxxxx

www.bis.gov.in

Indicates the device is approved according to the BIS regulations.

Indicates the device is approved according to the INMETRO regulations.

Important information

Summary of Contents for Coronis Uniti







































































Search results

Summary of Contents for Coronis Uniti

Reviews:

Related manuals for Coronis Uniti

Brands by name

Popular brands

Barco Coronis Uniti, User Manual

Search results

Summary of Contents for Coronis Uniti

Reviews:

Related manuals for Coronis Uniti

Brands by name

Popular brands