Barco Coronis Uniti, User Manual

Page: 30 / 70

K5902079 /11 Coronis Uniti 30
4. Set a SoftGlow Task Light brightness value as desired and confirm.
The SoftGlow lights can also be enabled and configured in the Intuitive Workflow Tools. See the
Barco “Display Controller and Intuitive Workflow Tools” user guide on the included documentation
CD, or at
www.barco.com/support.
4.7 SoftGlow Wall light
About the SoftGlow Wall light
The SoftGlow Wall light provides ambient lighting for the reading room to reduce eye fatigue. The brightness
of the light is configurable.
To enable/disable the SoftGlow Wall light
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Lights menu.
3. Enter the SoftGlow Wall Light submenu.
4. Select Enabled/Disabled as desired and confirm.
The SoftGlow lights can also be enabled more quickly via the shortcut bar. See “SoftGlow lights”,
page 23 .
The SoftGlow lights can also be enabled and configured in the Intuitive Workflow Tools. See the
Barco “Display Controller and Intuitive Workflow Tools” user guide on the included documentation
CD, or at
www.barco.com/support.
To adjust the SoftGlow Wall light brightness
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Lights menu.
3. Enter the SoftGlow Wall Light brightness submenu.
4. Set a SoftGlow Wall Light brightness value as desired and confirm.
The SoftGlow lights can also be enabled and configured in the Intuitive Workflow Tools. See the
Barco “Display Controller and Intuitive Workflow Tools” user guide on the included documentation
CD, or at
www.barco.com/support.
4.8 DPMS mode
About DPMS mode
Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnostic
lifetime by automatically switching off the backlight when the display is not used for a specified period of time.
By default, DPMS mode is enabled on your display, but it also needs to be activated on your workstation. To
do this, go to the “Power options” of your workstation.
Barco recommends setting DPMS activation after 20 minutes of non-usage.
When DPMS mode is enabled, an additional power saving function becomes available: hibernate.
See
“Hibernate”, page 31 for more information.
Advanced operation